 |
KSh38,860
The DS-3E1310P-E is a 10/100 Mbps web-managed switch that is designed for IP surveillance applications. Easily configured via a Web interface, users can setup VLANs, port mirroring, SNMP, and more. Or, they can just as easily use default settings, while still taking advantage of unique hardware features, such as outdoor power surge protection, optimized VIP ports, and extended power mode for longer cable runs to IP cameras. Hikvision web-managed switches provide the right mix of features to help reduce the cost of installation and maintenance.
| HPE – power supply – hot-plug / redundant – 500 Watt – 563 VA | |
|---|---|
| Device Type | Power supply – hot-plug / redundant – plug-in module |
| Specification Compliance | Flex Slot |
| 80 PLUS Certification | 80 PLUS Platinum |
| Weight | 910 g |
| Input Voltage | AC 100-240 V |
| Power Capacity | 500 Watt / 563 VA |
| Input Connectors | Power IEC 60320 C14 |
| Dimensions (WxDxH) | 6.8 cm x 22.53 cm x 4.04 cm |
| Designed For | Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10, Medium Solution with HPE ProLiant DL325 Gen10, Medium Solution with HPE ProLiant DL360 Gen10, Small Solution with HPE ProLiant DL360 Gen10; ProLiant DL325 Gen10, DL345 Gen10, DL360 Gen10, DL365 Gen10, DL560 Gen10, DX385 Gen10 |
Input Voltage100V – 240V AC
Efficiency94%
Power Output800W
Warranty Standard StatementHPE power supplies will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded.
Weight (imperial)3.99 lb
Weight (metric)1.81 kg
Product Dimensions (imperial)7.5 x 12.75 x 4 in
Product Dimensions (metric)19.05 x 32.38 x 10.16 cm
Detailed Product DescriptionHPE 800W Flex slot platinum hot plug low halogen power supply
The DS-3D2208P is a two-layer network switch designed for video data transmission. They support all kinds of connections varying from 10/100M to 1000M for the flexible network configuration. The device supports various network management standards such as SNMP, Telnet, RMON and CLI. It can be managed by different network management platforms for a safe surveillance environment with highbandwidth and high-performance. DS-3D2000 PoE switches support 802.3af and 802.3at power supply modes with the maximum power supply on each port reaching up to 30W. The product is capable of distributing power automatically according to each port’s load characteristic, which is ideal for video surveillance application.
Expand your network capabilities with this DS-3E1310P-E 8-Port PoE-Compliant Managed Network Switch from Hikvision. This pro-grade switch gives your network 8 10/100 Mb/s client ports and 2 x combo uplink ports for up to Gigabit speeds between multiple switches. Each client port supports 802.3af/at PoE protocols for up to 30W of port power and up to 123W of switch power, letting you power compatible devices directly via Ethernet. This switch also offers you convenient web-based management tools such as VLAN, link aggregation, QoS, and more.
The Hikvision DS-3E0109P-E is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones, etc.
Wi-Fi Speed:
AC1000 (N300 + AC700)
Wi-Fi Bands:
2.4 and 5 GHz (simultaneous dual band)
Number of Ethernet Ports:
1x Fast Ethernet WAN port
4x Fast Ethernet LAN ports
The Hikvision DS-3E0318P-E is a 16 10/100Mbps ports unmanaged switch that requires no configuration and provides 16 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones, etc.
| Device Type | Network adapter |
|---|---|
| Form Factor | Plug-in card |
| Interface (Bus) Type | FlexibleLOM |
| PCI Specification Revision | PCIe 3.0 |
| Ports | 25 Gigabit Ethernet x 2 |
| Data Link Protocol | 10 GigE, 25 Gigabit LAN |
| Data Transfer Rate | 25 Gbps |
| Performance | Bidirectional throughput: 100 Gbps ¦ Bandwidth per port: 50 Gbps |
| Capacity | Jumbo frame size: up to 9.2 KB |
| Processor | 1 x Mellanox Technologies Mellanox ConnectX-4 Lx |
| Compliant Standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg, IEEE 1588v2 |
| System Requirements | SuSE Linux Enterprise Server 11, Microsoft Windows Server 2012, Oracle Solaris 11.1, Microsoft Windows Server 2012 R2, VMware ESXi 5.5, Ubuntu 14.04, Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 6.6, Red Hat Enterprise Linux 7.1, Citrix XenServer 6.5, SuSE Linux Enterprise Server 12, Red Hat Enterprise Linux 6.7, Red Hat Enterprise Linux 7.2, VMware ESXi 6.0 |
| Manufacturer Warranty | 1-year warranty |
| Designed For | Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10, Medium Solution with HPE ProLiant DL360 Gen10, Small Solution with HPE ProLiant DL360 Gen10; ProLiant DL180 Gen10, DL360 Gen10, DL380 Gen10, DL385 Gen10, DL560 Gen10, XL170r Gen10, XL190r Gen10, XL270d Gen10; SimpliVity 380 Gen10 |
The DS-3E0105P-E is a 10/100 Mbps unmanaged switch that requires no configuration and provides four PoE (Power over Ethernet) ports. It can automatically detect and supply power to all IEEE 802.3af/at compliant powered devices. In these situations, electrical power is transmitted alongside data in one single cable, allowing network expansion where there are no power lines or outlets, for devices such as IP cameras, IP phones, etc
Reviews
There are no reviews yet.